Announcement

Collapse
No announcement yet.

Stick making tips

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stick making tips

    This is a YouTube I found very helpful for holding a stick. And for centering a hole in the top of a shank or staff for mounting topper. Accessories are things that can be easily made. The stick vise uses a section of inter tube I think as a holding band. That is not clear in his presintation. Centering a hole is not easy at times ,his jig for doing that works well I have made 5 different sizes. I made the sander to square up the top of the stick using some 2" long 1" dowles then drilled a 5/16" hole though them and epoxied different size 5/16th washers on one end that I attach self adhesive sandpaper to.
    https://m.youtube.com/watch?v=pbyy62...ka5uY9FhhvkvdQ

  • #2
    Thanks for the post, good video.
    . . .JoeB

    Comment


    • #3
      Lots of good ideas in that video; thanks for sharing
      wayne

      Comment


      • #4
        Thank you so much for this link. Very interesting and simple-looking jigs.

        Comment


        • #5
          Thank you Randy

          Comment

          Working...
          X