What is this called?

[Daliab]

Thank you everyone for all of your suggestions. Dave Keele was familiar with the original system I have and was able to direct me to a workable solution. I ordered the part today. Thanks again Dave.

[Daliab]

Dave, small world. This is one of Ferd Nordstrum's original machines that I bought from one of "our" Mid-America Woodcarvers Association members who recently passed. The Chicago Die Casting 2123 will work just fine and now I see how it is Ferd made the original flange.... no wonder why I...

[Daliab]

Sappy, that's the closest to what I'm looking for but really pricy. Nobody said carving wood was cheap... haha.
Thanks

[Daliab]

Thanks to those who answered my inquiry. Not what I'm looking for. Afraid a freewheel shaft collar with set screw on each side won't provide enough to keep the buffing wheel stationary from freewheeling on the rod. Claude's suggestion comes the closest but looks to light duty for what I need it for...

[Daliab]

It's a sharpening system similar to a Burke. The bracket holding the buffing wheel has 3 small bolts that hold the buffing wheel in place. The bracket also has a set screw to keep it from free spinning on the 5/8" rod. I'd like to mount another hard felt wheel on the system but unable to...

[Daliab]

I"ve been looking for this kind of bracket to go on a 5/8" rod on a sharpening machine. What's called and where can I buy one? Goes on a system similar to a Burke Sharpening System but not a Burke....